GB-17 [ENGLISH]
Using timer
Alarm timer
A file can be played (or the alarm sounded) at a designated time. In the case
of file playback, place the file to be played in the ALARM folder ahead of time
(See page 31). The alarm will sound for 10 seconds if there are no files in the
ALARM folder.
1. In the stop mode, press the n STOP/MENU button for at least 2 seconds.
Move the Jog switch up or down to select “COMMON”, then press the Jog
switch.
2. Move the Jog switch up or down to select “TIMER”. Then press the Jog
switch.
3. Move the Jog switch up or down to select “ALM ON”. Then press the Jog
switch. The hour display of alarm on time blinks.
4. Move the Jog switch up or down to select the hour. Then press the Jog
switch. The minute display blinks.
Set the minute in the same way.
5. Move the Jog switch up or down to select the alarm sound.
bEEP: Beep sound
wv
MUSIC: File
Then press the Jog switch. “TIMER” returns.
6. Press the n STOP/MENU button twice.
- If you want to cancel the alarm timer, select “TIM OFF” in the step 3
above.
When the alarm on time arrives, the alarm timer will be activated.
To Next Page
Loading...
