GB-8[ENGLISH]
Date and time setting
Make absolutely sure that the date and time are correctly set before starting a
recording.
1. In the stop mode, press the n STOP/MENU button for at
least 2 seconds. The first stage menu appears.
2. Move the Jog switch up or down to select
“COMMON”.
3. Press the Jog switch. The second stage menu
appears.
4. Move the Jog switch up or down to select
“CALENdAR”. The unit enters the date and
time setting mode.
5. Press the Jog switch. The year display blinks.
6. Move the Jog switch up or down to select the
year. Then press the Jog switch. The month
display blinks.
7. Set the month, day, hour display (24H or AM/PM), hour and minute by
following step 6 above.
When the minute setting is completed, “CALENdAR” returns.
8. Press the n STOP/MENU button twice.
To Next Page
Loading...
