Sanyo LCD-32E30A - Connecting the LCD TV; Connecting the AC Power Cord; Connecting an Outdoor Aerial

9
5. Items of Factory menu
Vendor may customize design and add adjustment items Factory menu as far as all required items are
included.
Press up and down key can move high light item from Color Temperature – WARM -> Color Temperature –
Medium -> Color Temperature – Cool -> Timer Clear -> Preset Channel -> NVRAM Clear -> Full Power ->
Source Calibration -> Reset to Default -> RF Burn In -> RF F/W Upgrade -> MCU Burn In -> USB F/W
Upgrade.
The NVRAM Clear and Reset to Default items will have a check dialog “yes or no” to do or not.
Push “OK” key can select high light item function. (Press right key can adjust value)
Display model name, firmware version and released date on bottom
5-1) Cool
Press up or down key can select high light item function.
Press OK key to enter the item.
Following data for color temp shall be edited manually.
-R, G, B data for each preset.
-Press “Up” or “Down” key to select “R”, “G”, “B” item
-Press “Left” or “Right” key to set the “R”, “G”, “B” value.
- Press “MENU” or “BACK” item to exit to factory mode
5-2) Warm
Press up or down key can select high light item function.
Press OK key to enter the item.
Following data for color temp shall be edited manually.
-R, G, B data for each preset.
-Press “Up” or “Down” key to select “R”, “G”, “B” item
-Press “Left” or “Right” key to set the “R”, “G”, “B” value.
- Press “MENU” or “BACK” item to exit to factory mode