Sanyo LCD-32E30A - Basic Display and Volume Control; Displaying TV Status Information; Volume Adjustment and Energy Saving; Using the Still Picture Function

BASIC OPERATION
Press
the INFO button on the
Remote Control to display
LCD W.status
1280 x768
(60H2)
Adjust
the volume by
pressing
VOL
+/-
buttons on the Remote
Control / Side Controls.
The volume dialogue box
will
appear
on lhe screen
for a short time,
Press
the
VOL
+
button to increase
volume, and
the VOL
-
bulton to decrease volume.
This function is used to
limit maximum brightness
for energy saving.
Press ENERGY SAVE
bufton on the
Remote Control to set
ihis function
as
'OFF", "Energy
Save
1",
"Energy
Save
2", and'Energy Save 3".
Note:
.
The
"Light
Sensor" and
"Manual
Backlight Setting" function are
invalidated when
the
"Energy
Save
Mode"
function
is'turned on.
Press STILL bufton on the
Remote Control to switch
the still function On/Off. The still function freezes the
main Dicture.
Note:
.
When the stillfunction is
On, the
picture
will be
frozen, but audio will continue.
.
This function
doesn'tworkwhen the input signal
is 1080p.
20