Sanyo LCD-32E30A - Picture Menu: Advanced Settings; Aspect Ratio and Backlight Control; Energy Saving and Light Sensor Modes

MENU
OPERATION
From
the function
'Aspect Ratio' select
the
desired
setting.
Select
from
"Wide',
"Super
Live 2',
"Cinema
2",
"4
: 3",
"Super
Live
1',
'Cinema
1',
"Sublitle",
"14:9",
and
"Auto"
by
pressing
<>
buttons.
Note:
.
'Auto'is only supported
for HDMI
input.
"Energy
Save Mode",
"Light
Sensoi',
and
"Backlight
Setting'
functions
are selected by
pressing
v
buttons.
Press < > buttons
lo
adjust
values/settings.
Note:
.
"Backlight'
cannot be
adjusted except
for PC input or
when
'Memory'
mode is selected
in
"Picture
Mode"
(Refer
to
"Picture Mode" above
)
Example:
lf'Light Senso/'function
is lurned 1o
"ON",
the
'Energy
Save
Mode',
and
"Backlight
Setting" can't
be
adjusted.
(Olher
functions
are set
to
"OFF
.)
This function
is used to set
maximum brightness
to limit
power
consumption of
the LCD TV.
Select'Off,'Energy
Save
Mode 1",
"Energy
Save
Mode 2', and
"Energy
Save
Mode 3'by
pressing<>
buttons,
This function automatically
adjusts
the
backlight
of
the LCD TV arcording to ambient
levels.
When surroundings
are dark,
the LCD W
will
automatically
adjust
the
backlight
to MlN.
\ /hen surroundings
are bright,
the LCD TV will automatically
adjust the backlight
to MAX.
Select
"Off, 'On",
and
'On:
Display' by
pressing
< > buttons.
'"
9fE,
Eneruy"$Aveilode
{
Enerbtr
s*eji{odtldl-€nergt
sav"
l!q@ s
Yo of Maximum
Briohtness
100
80
60
40
30