Sanyo LCD-32E30A - Menu Operations: Audio Settings; Accessing the Audio Menu; MTS and Dual Audio Modes; Selectable Sound Options

MENU OPERATION
I
Press MENU button and
the Main Menu will appear,
Press
{ }
buttons
to select ?UDIO', and display
?UDIO" menu.
f
eress a
V
buttons
to
selec,t
item desired.
J
Press OK button
to confirm
the
selection.
Items are'MTS",
"Dual',
"Selectable
Sound',
"Bass
Boost", and
"Virtual
Surround'.
. Press BACK button
on Remote Control
to
cancel
operation on OSD and return to normal screen.
. Press
MENU
bufton
or wait for aboul
60
seconds
lo exit menu operation.
Note:
.
"MTS'
and
'Dual'
are supported
forAW input.
.
"Dual'
cannol be adjusted
when the
"MTS"
item is selected in the
"Mono'
mode.
.
'Mrtual
Surround" cannot
be adjusted excepl
when
"Selectable
Sound" is selected as
"Use/
mode
@
Press <> buttons
on Remote Control
lo select eilher
"Aulo",
and
"Mono"
mode.
The
'Auto" mode can automatically
recognize stereo/bilingual
programs
depending on
the broadcast signal.
. Press BACK button
to return to the
previous
menu.
. Press MENU button or
wail for about 60 seconds
to
exit
menu
operalion.
Note:
.
'MTS"
is only supported
forATV
input.
@
Press < > buttons on Remote Conlrol
to select either'Dual
1", or'Dual
2" mode.
Note:
.
"Dual"
is
only
supported forATV
input.
@
The funclions
"Selectable
Sound",
"Bass
Setting",
'Treble
Setting", and
"Balance
Setting' are selected
by
pressing
Y
butlons.
Press { } buttons
to
adjust
values/setlings.
Note:
.
The functions
"Bass
Setting',
"Treble
Setting',
and'Balance
Setting' are supported
when
"Selectable
Sound" is s€lected in
the'Usef mode.
33