Sanyo LCD-32XH4 - On-screen Service Menu System; Entering and Exiting the Service Menu; Adjusting Service Data

-12--12-
On-screen Service Menu System
General
This set has an On-screen Service Menu System included in the CPU that allows remote operation for most of the
service adjustments.
■ How to select the service item and adjust data:
On-screen Service Menu System
Quick operation is needed to enter Service Mode.
■ How to enter the Service Menu
1. Press and hold the MENU button on Side Controls.
2. Keep pressing the MENU button and press the NUMERIC "1" button on the remote control, and the service mode
menu will be displayed.
ECO
MAIN/SUB
CHANGE
BACK
PIP
BASS
SOUND
VIDEO MODE
POWER
RECALL
DISPLAY
MUTE
AUDIO MODE
SLEEP
IMAGE
ZOOM
SURROUND
CH
CH
ECO
MAIN/SUB
CHANGE
BACK
PIP
BASS
SOUND
VIDEO MODE
POWER
RECALL
DISPLAY
MUTE
AUDIO MODE
SLEEP
IMAGE
ZOOM
SURROUND
CH
CH
To adjust data:
1) Select “DATA” line by pressing or button.
2) Press + or - button to adjust data.
Open or close the On-Screen Menu.
MENU button
Side Controls
Service Mode
Source All
Properties: NormalRed
Data: 88
[ Service Mode Menu ]
Data Value
Input Source
Item Name
Version No.
V1.29070612un42
Service Mode
Source All
Properties: NormalRed
Data: 88
V1.29070612un42
■ To exit service mode
1. Press MENU button on the Side Controls or remote control.
2. Turn the TV off by pressing the POWER ON/OFF button on the Side Controls or remote control.
Note: The all adjusted data in service mode will be memorized into EEPROM automatically.