-12-
Service Mode
Source HDMI1
Properties: BrightnessOffset
Date: 0
V1.04 1110UH4L42
-12-
On-screen Service Menu System
General
This set has an On-screen Service Menu System included in the CPU that allows remote operation for most of the
service adjustments.
■ How to select the service item and adjust data:
On-screen Service Menu System
Quick operation is needed to enter Service Mode.
■ How to enter the Service Menu
1. Press and hold the MENU button on Side Controls.
2. Keep pressing the MENU button and press the MUTE button on the remote control, and the FACTORY MENU
will be displayed.
To adjust data:
1) Select “DATA” line by pressing ed button.
■ To exit service mode
Press MENU button to exit service mode.
Note: The all adjusted data in service mode will be memorized into EEPROM automatically.
2) Press
7 8
button to adjust data.
Open or close the On-Screen Menu.
MENU button
Side Controls
Service Mode
Source HDMI1
Properties: BrightnessOffset
Date: 0
[ Service Mode Menu ]
Data Value
Input Source
Item Name
Version No.
V1.04 1110UH4L42
1 2 3 4
A
B
C
D
E
NOTE: DO NOT SCALE
ZONE
1995/9 Pro/E
JIS A4
A
B
PART CODE PAGE
1AA2DES0988-- 1 / 1
PART NAME
DEC. CONTROL SHEET-N6VV
ORIGINAL MODEL PROD.CODE
32-N6VV
DRAW.ID/FILE PLOT DATE
1AA2DES0988-- P1 04-Jul-08
08.7.10
APPROVED
MAO.J.D
CHECKED
08.07.05
CHECKED
ZHAO.Z
08.07.04
DESIGNED
ZHAO.G.G
08.07.04
DRAWN
ZHAO.G.G
TOLERANCES
201 OVR ±0.20
51-200 ±0.15
50 UND ±0.10
SCALE
1.000
UNIT ANGLE HOLES
MM
±0.1 ±0.05
NOTE
MK DATE EI.NO. REVISION REV.BY SEC
SEI
HUAQIANG SANYO TECHNOLOGY DESIGN Ltd. DIVISION
MATERIAL(GENERAL/TYPE/MFR)
:
REFER TO CHART ABOVE
:
FINISH
PRINTING : SP-515, FLEET GRAY
No. PAGE
PART CODE PART NAME
MATERIAL
PROOF
MATERIAL
1 01 1AA2DES0988-- DEC. CONTROL SHEET-N6VV
×
IND PS T=0.3MM
+ ADHESSIVE TAPE NITTO-5000NS
To Next Page
Loading...
