-13-
r
W/B ADJUST
Pattern
PAL-N White 80%.
Condition
Picture Mode: STANDARD
Color Temperature: NORMAL
Aging Time: More than 10 minutes
Adjustment
1. Enter the Service Mode.
2. Select "W/B ADJUST" by pressing ▲ or ▼ button, then press ENTER button to enter W/B ADJUST
menu.
3. Press ▲ or ▼ button to select RED, GREEN or BLUE, then press ◄ or ► button to adjust data.
Or you can adjust values by simply pressing numeric buttons on the remote control.
To adjust RED: Press 1 (data value up) and 4 (data value down).
To adjust GREEN: Press 2 (data value up) and 5 (data value down).
To adjust BLUE: Press 3 (data value up) and 6 (data value down).
4. Exit the Service Mode.
After adjustment, confirm white balance again by normal picture.
Note: • Maybe BASE data for each TV set is different. And the items are for factory setting and
Service Centre.
• If you want to adjust any item, please consult qualified service personnel.
Service Adjustments
To Next Page
Loading...
