Sanyo LCD-32XR10SA - Connecting Headphones; Connecting a USB device; Connecting an HDMI device

Connections(Continued)
9
Connecting Headphones
Insert the plug of the headphone into the TV’s Headphone jack.
When using headphones, adjust the headphone volume so as to avoid
excessive levels, as hearing damage may result.
Headphones
TV Side
Connecting an HDMI device
TV REAR
HDMI cable
HDMI device
Connect the HDMI cable between the HDMI jack on the TV and
HDMI output jack on the device.
Note: If your device has an HDMI connection, we recommend you
use that to get the best quality possible.
To play from the HDMI device:
How to connect an HDMI device:
1. Turn on your TV, then press INPUT button. The
Input menu opens.
2. Press 5or6to select HDMI1(or HDMI2 if HDMI 2
jack is used), then press ENTER to confirm.
Note: You can also press HDMI button once or twice
for HDMI1/HDMI2.
3. Turn on the HDMI device and set it to the correct
mode. Refer to the instructions that came with the
HDMI device.
If the external device has DVI output only, use a DVI to HDMI
adapter cable to connect to the HDMI terminal. Connect the audio
cable to the PC IN AUDIO jack on the TV rear.
Note:
Connecting a USB device
TV Side
To USB port
Insert your USB device into the USB port.
To play from the USB device:
1. Turn on your TV, then press INPUT button. The Input menu opens.
2. Press 5or6to select USB, then press ENTER to confirm.
Note: You can also press USB button on the remote control for USB.
Never remove the USB device or turn off the TV while using the USB
device.
To connect headphones: