Connections(Continued)
10
Connecting a component video device
TV REAR
Component
Audio cable
Component video device
video cable
To connect a component video device:
1. Turn on your TV, then press INPUT button. The Input menu opens.
2. Press 5or6 to select Component, then press ENTER to confirm.
Note: You can also press COMP to select directly.
3. Turn on your external device and set it to the correct mode. See the
device’s user guide for more information.
To play from the component video device:
Connect the Component Video cable between the Y, Cb/Pb, Cr/Pr input
jacks on the TV and Y, Cb/Pb, Cr/Pr output jacks on the device .
Connect the Audio cable between the AUDIO input jacks on the TV and
AUDIO output jacks on the device.
Component cables often have red, green,
and blue color-coded video connectors and
red and white audio connectors. Match the
colors when making connections.
Connecting a computer
TV REAR
D-Sub cable
(analog RGB)
To monitor port
(15-pin D-Sub)
To audio output jack
Audio cable
(stereo mini plugs)
To connect a computer:
1. Turn on your TV, then press INPUT button.
The Input menu opens.
2. Press 5 or 6 to select VGA, then press
ENTER to confirm.
Note: You can also press VGA button for VGA.
3. Turn on your computer, and adjust the display
properties as required.
To play video from the computer:
Connect a VGA cable between the VGA jack on the computer and the
VGA input jack on the unit.
Connect an Audio cable between the AUDIO output on the computer
and AUDIO input jack on the unit.
To Next Page
Loading...
