Sanyo LCD-42XR9DA - Troubleshooting Guide

21
2. Troubleshooting guide
2.1. No raster
Turn-on power supply, chec
k
if the red indicator is light in
the STANDBY?
Check if 5VSTB of X802 9#
on main board is normal?
Check STANDBY circuit o
f
p
ower supply board
Press POWER button on the
unit or sensor control an
d
check the indicator.
Check if the PIN3 of X804 on
main board is high-level?
Check if the PIN11 of X802 o
n
main board is high-level?
Check power
supply board
Check power board and
back light board
yes
no
no
red
blue
yes
Check the backligh
t
control circuit on the
main board
no
yes