5.5.2 Media playing function:
Insert USB memory containing files of picture, audio and video, check if the picture, the sound
and other functions are normal.
5.6 MUSIC port (only for SANYO model)
Input audio signal from sound output device to side music port, check if the sound is normal.
5.7 HDMI port
Input HDMI signal from VG849 signal generator to HDMI port with the formats listed in Table 3
and Table 4 respectively, check if the display and the sound (32 kHz, 44.1 kHz, 48 kHz) are normal
under the circumstances of power-on, switching channels or formats, etc
5.8 Other functions checkup
Check if functions - timing on/off, sleeping off, picture/sound mode, OSD, stereo and digital
audio ports, etc., are normal;
Check if pure audio program (RADIO) are normal when switching to digital programs;
Check if functions of LCN and OTA are normal.
6 User menu setup before shipment
Enter into page “LOCK” of user menu, select item “Restore Factory Default” to make setup
before shipment.
Main procedures as follows:
1）Clear out information of all programs;
2）Clear out information about VCHIP – parents control;
3）Default analog parameters setup for user;
4）Set Menu Language as “English”;
5）Set Power on mode as “Off”.
To Next Page
Loading...
Need help?
General
