7 800×600 48.077 72.188 50 VESA
8 800×600 46.875 75 49.5 VESA
9 1024×768 48.363 60.004 65 VESA
10 1024×768 56.476 70.069 75 VESA
11 1024×768 60.023 75.029 78.75 VESA
12 1152×864 67.5 75 108 VESA
13 1280×960 60 60 108 VESA
14 1280×1024 63.98 60.02 108 VESA
15 1280×1024 80 75 135 SXGA
16 1440×900 - 60 - -
17 1680×1050 - 60 - -
18 1360×768 47.7 60 85.5 -
5.5 HDMI port
Input HDMI signal from VG849 signal generator with the formats listed in Table 2 and Table 3
respectively, check if the display and the sound (32 kHz, 44.1 kHz, 48 kHz) are normal under the
circumstances of power-on, switching channels or formats, etc.
5.6 USB port
Media playing function
Insert USB memory containing files of picture, audio and video, check if the picture, the sound and
other functions are normal;
5.7 MUSIC port (only for SANYO model)
Input audio signal to side music port from audio output device, check if the sound is normal;
5.8 Other functions checkup
a) Check if timing on/off, sleeping time, picture/sound mode, OSD, stereo, digital audio interface,
etc., are normal;
b) Check if digital RADIO program is normal;
c) Check if the functions of LCN, OTA are normal;
6 User menu setup before shipment
Enter into “LOCK” user menu, select submenu item “Restore Factory Default” and then press key
“OK” to make setup before shipment;
a) Clear out information of all programs;
b) Clear out information of VCHIP, etc.;
c) Recover default analog parameters;；
d) Set menu language as “English”;
e) Set power-on mode as “OFF”.
To Next Page
Loading...
