Section 2F: Using Contacts 113
Selecting a Ringer Type for an Entry
You can assign a ringer type to a Contacts entry so you can
identify the caller by the ringer type. (See “Ringer Types” on
page 47.)
To select a ringer type for an entry:
1. Display a Contacts entry.
2. Select the entry for which you want to set the incoming
ringer and press .
3. Select a phone number, and then select Options (right
softkey)
>Edit; or if you are selecting an item other than
the phone number, select
Edit (right softkey).
4. Scroll down to the box next to the icon and press to
display the Ringer Type menu.
5. Use your navigation key to scroll through available
ringers. (When you highlight a ringer type, a sample
ringer will sound.)
6. Highlight your desired ringer and press .
7. Select Save (left softkey) to save the new ringer type.
Contacts
To Next Page
Loading...
