Sanyo M1 (Sprint - Setting the Recording Guard; Voice Memo Options

146 Section 2H: Using Your Phone’s Voice Services
Setting the Recording Guard
With this feature, you can record voice memos without
interruption by incoming calls.
To set the recording guard:
1. Select >Tools > Voice Services > Voice Recorder.
2. Highlight Record or Record:Speaker, and then select
RecGuard (right softkey).
3. Select On or Off and press .
While Recording Guard is on, your phone’s standby screen will
display “Phone Off.” You cannot make or receive calls.
Voice Memo Options
There are several user options available for managing voice
memos.
To display the voice memo options:
1. Select >Tools > Voice Services > Voice Recorder > Play or
Play:Speaker > Voice Data.
2. Select the desired voice memo and select Options (right
softkey).
3. To select an option, highlight it and press .
n
Speaker On or Speaker Off to activate or deactivate
speakerphone mode.
n
PlaySelected or PlayAll to play a selected voice memo
or all voice memos.
n
Display/Edit to edit or display details relating to your
voice memos.
n
Go to Time to set the starting point of the recording.
n
Send via Bluetooth to send voice memo via
Bluetooth.
n
Erase or Erase All to erase an individual memo or all
voice memos.