Sanyo M1 (Sprint - Adding a New Contact to Your Personal List

Section 2J: Using Sprint PCS Ready Link 193
Adding a New Contact to Your Personal List
You can store a total of 200 entries in the Personal Lists.
To add a new Sprint PCS Ready Link contact:
1. Press .
2. Select Go to > Personal List > Add Contact.
– or –
Select a contact, select
Options (right softkey), and then
select
Add Contact.
3. Enter a name for the new contact and press . (This is
the name you will see when calling or receiving a call
from the contact.)
4. Select R-Link Number, enter the contact’s 10-digit
Sprint PCS Ready Link number (the contact’s wireless
phone number), and press .
5. Select Save (left softkey) to save the new contact to your
Personal List.
Tip:
Tip: You are not allowed to use the following symbols during
step 3:
@ : ; / * ) (.
Sprint PCS Ready Link