Sanyo MAJ-R70 - Page 14

EN-13
USB MEMORY DEVICE OPERATION
• IMPORTANT INFORMATIONS •
-Copyright protection files cannot be
played back.
-Copyright protection files on the USB
memory device are skipped automatically
when played
back.
-Recommended use:
Flash memory type USB memory player
Not recommended:
Hard disc memory type USB player
-Some Flash memory player will not play
successfully with this unit.
Before use
Connect the USB memory device to the USB
port of the unit correctly.
See “CONNECTIONS”.
- Some USB memory devices cannot be used.
- This unit can recognize only MP3 or WMA
(Window Media Audio) files.
- This unit can recognized up to 999 files or
folders in USB memory device.
However, it cannot recognize by depending on
the folder structure.
- It may take more time for the reading opera-
tion depending on the recording condition.
- Please refer to “MP3/WMA CD information” on
the page 11.
Basic playback
1. Press the FUNCTION button to select “USB
FUNCTION”.
The total MP3/WMA file number in the USB
memory device appears.
- If the connection of the USB memory de-
vice is failed or the until cannot recognize
the USB memory device.”NO USB”
appears.
- If there’s no MP3/WMA file in the USB
memory device, or just some empty folders
in the USB memory in the folder appears.
2. Press file the ALBUM/PRESET DN/UP or
FOLDER/PRESTE button on remote control
to select the desired folder.
The folder name and first MP3/WMA file name
scroll over on the display, then the first MP3/
WMA file number in the folder appears.
3. Press the F or B button to select the de-
sired MP3/WMA file.
4. Press the R/ P button(or the USB R/ P button on
on the remote controller)
to start playback.
- The folder name and MP3/WMA file name
will scroll on the display,
then the MP3/WMA file number and elapsed
playing time appear.
5. Press the STOP /BAND C (or the STOPC button
on the remote controller)
to stop the USB memory device playback at
any time.
Temporarily stopping playback
Press the R/ P button (or the USB R/ P button on the
on the remote controller).
To resume playback, press the button again.
Programmed playback
Up to 32 MP3/WMA files can be programme for
playback in any order.
- First, select “USB FUNCTION” and connect
the USB memory device you want progromme
to the USB port of the until correctly.