CD CHANGER MECHANISM OPERATION DESCRIPTION
b.
●
(1)
(2)
(3)
LOADING PLATE MOTION + “’OPENr’
The
loading motor (377) runs, and the loading plate (434) starts movtig toward the “OPEN” position,
d
..
performing the following operations.
Using hooks a and b on the loading plate (434), the CD is extractecf and moved from the disc case (363).
When it is over the turntable, hooks a and b separate from the CD and retract into the loading plate.
The CD is now “FREE” on top of the loading table.
Next, the loading plate moves further and, by pressing on the Ioadimg table (431), moves the loading table lock
lever (430) .
This causes it to link with the loading table and advance toward the “OPEN” position.
DISC
LOADING
(434)
PLATE
I
CMsc
I
*
“ LOADING PLATE (434)
n
.......................................................................
~Refer to the EXPLODED VIEW on pages 34 and ~
~35 for the numbers of parts not indicated here. :
.................... ... .. ..............................................:
CLOSED
LOADING
TABL~
AS5’Y
LOADING PLATE J%S’V
(431) - (434) “
-15-
To Next Page
Loading...
