Sanyo MCH-900F - Page 22

i
REPLACING THE PRINCIPAL PARTS OF THE CD CHANGER MECHANIS1’vl
g.
APPLYING GREASE
. Apply small amounts of grease to the designated areas to ensure proper changer operation.
.4
..
(a) WORM GEAR (366), DISC CASE GUIDE SHAFT
. Apply FLOIL (G-425A) to the center
portion (about 10 mm) of the worm
gear (366).
WORM GEAR(366)
7
\ FLOIL I
~ (G-425A)
10mm
—
1
\
I
●
Apply “SANCOL” (CFD-703) to the
disc case guide shaft.
●
Also apply “SANCOL” (CFD-703) to
the gap between the disc case and
the disc case guide shaft.
I
1
‘)JY
DISC CASE
(363)
-21-