REPLACING THE PRINCIPAL PARTS OF THE CD CHANGER MECHANISM
(b) GEARS (397, 398, 402), CAM GEAR (391), CHASSIS SHAFf
.
AS shown in the diagram, appl!f FLOIL (G-425A) tO
–.414
onlv one half of the top surfatx$ of the cam gear (391).
vIEW-A
I
I -4/4 I
&l 1
● Apply FLOIL (G-425A} to
the
area indicated by the ~
~...Dnotoappjyjg reaieitottheh: ....-.
~ lever (407) to prevent the
; plunger from malfunctioning. I
..................................................... ...
(c) MOUNTING THE LOADING GEAR (3= )
dLuL
FLOIL
FLOIL
(G-425A)
(G-425A)
FLOIL (G-425A)
Alignment mark
FLOIL (G-425A)
GEAR ,’”E “ (373)
mark
GEAR “D” (371)
.......................................................
. Apf)ty FLOIL (G-425A)
~ . There should be four gear ~
to
the five shafts.
teeth between the two
alignment marks.
-22-
.......................................................
To Next Page
Loading...
