CD CHANGER MECHANISM
b. LOADING PLATE MOTION +
OPERATION DESCRIPTION
“OPEN”
.4
● The loading mo[or (377) runs, and the loading plate (434) starts moving toward the *’OPEN” position,
performing the following operations.
(1)
(2)
(3)
Using hooks a
and b on the loading plate (434), the CD is extracted and moved from the disc case (363).
When it is over the turntable, hooks a and b separate from the CD and retract into the loading plate.
The CD is now “FREE” on top of the loading table.
Next, the loading plate moves further and, by pressing on the loading table (431), moves the loading table lock
lever (430)
This causes it to link with the loading table and advance toward the “OPEN”
position.
DISC
- LOADING PLATE
(434)
DISC
CLOSED
n
●
- LOADING PLATE (434)
4M
LOADING TABLE
L~;~O}EVER
GUIDE
(355)
&
1’
I
OPEN
... ..... ............ ............. ... ... ................... ,,, ..
j Refer to the EXPLODED VIEW on pages 34 and ~
~35 for the numbers of parts not indicated here. ~
................................................ . .. . .............:
-14–
To Next Page
Loading...
