Sanyo MCH-900F - Page 65

RE
a.
●
●
(1
?LACING THE pR~NclpAL PARTS OF THE CD cj+~Nf_JER
SENSOR P.C. BOARD LAYOUT DIAGRAM AND ITS APPLICATION
The CD changer mechanism employs four sensor P.C. boards.
Observe the following precautions to prevent sensor malfunctions.
. .
MECHANISM
.A4
Mount light-emitting and light-receiving elements on the P.C. boards M their correct positions.
Make sure such parts are not tilted or loose.
DISC CASE ELEVATOR
SENSOR ,PC.B (315)
I
!
1
T!!?!!J
DISC ~EW~;~fi ~
PHOTO
T
-1 ~
PHOTO SENSOR
SENSOR
0.2mm or mOre
Detects whether disc is
% D~3;3~ASE
present or absent
Detects chucking errors
J5_E@‘hou’dbepara’’e’to’chard
1
1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
-!ijij:
; The height of the P.C. board ;
I must be adjusted.
...... ....... ........ ................... ........
No.
304
345
450
ER CONNECTOR
(434)
PHOTO SENSOR
DISC
&
LOADING PLATE
..
)
\f-
-fI
r
LOADING PLATE
().2mm or more
SENSOR I?C.B (304
315
nnm
Should not be loos
+~
II
O.lmm or more
u
P.C. BOARD NAME
DESCRIPTION
LOADING PLATE SEN50R P.C. B
. Detects the loading status by monitoring the
movement of the loading plate (434).
DISC SENSOR P.C. B “LOWER”
These sensors detect the following conditions on
DISC SENSOR P.C. B “UPPER”
SENSOR P.C. boards 345 and 450.
. Disc present or absent (PCO02/PCO03)
● Chucking error (S005)
● Detects whether DISC CASE is in UP or DOWN
DISC CASE ELEVATOR
position (PCOO1 ).
SENSOR P.C.B
● Detects when DISC CASE is in RESET position
(s001).
. Detects
when loading plate (434) is in RESET
position (S002).
-16-