EasyManua.ls Logo

Sanyo MCH-900F - Maintenance and Servicing; Troubleshooting and Repairs

Sanyo MCH-900F
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
I
MAINTENANCE
I
Cleaning the unit If trouble occurs ....
Clean the outside of the unit with a clean soft cloth, To avoid the hazard of electric shock and damage to the
moistened with lukewarm water and wrung dry. Do not use
unit, have the unit bench tested by an authorized SANYO
solvents such as benzene or thinner. These will perma-
service station. Do not remove the unit from its cabinet to
nently damage the units finish.
attempt repairs yourself.
Cleaning the tape heads
When dust or reddish-brown oxide builds up on the tape
deck heads, pinch roller and capstan, the following prob-
lems may result:
Poor sound quality during playback
Distorted, poor quality recordings
Erratic tape speed during recording or playback
To ensure playback and recording with goodquality sound,
use a cleaning tape (available from your local audio dealer)
to clean the head block of the deck after about every 10
hours of use.
-16-

Other manuals for Sanyo MCH-900F

Related product manuals