EasyManua.ls Logo

Sanyo MM-8300 - Setting the Self-Timer

Sanyo MM-8300
332 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 2J: Using Your Phones Built-in Camera 167
Setting the Self-timer
To activate the Self-timer:
1. From camera mode, press Options (right softkey).
2. Highlight Self-timer and press .
3. Highlight the length of delay you want the timer to use
(10 seconds or 5 seconds) and press .
To deactivate the Self-timer, highlight Off and
press .
4. Press Start (left softkey) when you are ready to start
the timer. ( appears on the lower left portion of the
main LCD during the Self-timer countdown.)
5. Get ready for the picture. (When the timer is down to
three seconds, the Self-timer icon will turn red and the
phone will begin to beep.)
To cancel the Self-timer after it has started:
Press Cancel (right softkey).
Note: While the Self-timer is active, all keys are disabled except ,
, and Cancel (right softkey).
Camera

Table of Contents

Other manuals for Sanyo MM-8300

Related product manuals