Sanyo MM-8300 - Using the Stop Watch

144 Section 2H: Using the Phone’s Calendar and Tools
Using the Stop Watch
To start the stop watch:
1. Press to access the main menu.
2. Select Tools/Extras.
3. Select Stop Watch().
䡲
Press Start (left softkey) to start the stop watch
operation.
䡲
Press Stop (left softkey) to stop the stop watch
operation.
䡲
Press Resume (left softkey) to start the stop watch
operation again.
To record a lap time while the stop watch is running:
䡲
Press Lap (right softkey) to record time of first lap.
䡲
Press Lap (right softkey) again to record next lap.
(You may continue this until lap 5.)
To display the stop watch options:
1. During stop watch operation, press Options (right
softkey).
2. To select an option, highlight it and press .
䡲
Go to Lap Listto display a Lap List. Press Detail (left
softkey) to display the lap list detail or press Options
(right softkey) for the further options.
䡲
EditTitle to edit the current lap list’s title.
䡲
Erase This to erase an individual Lap List.
䡲
Erase All to erase all existing Lap Lists.
䡲
Save to Lap List to save the recorded lap times.
䡲
Resetto reset the time to zero and clear any recorded
lap times.
JKL