Section 3B: Sprint PCS Vision 265
Though the browser is open, you are not currently in an active
data session - that is, no data is being sent or received. As soon
as you navigate to another page, the active session will launch
and you will see the “Connecting...”message.
NetGuard
When you first connect to the Web, the Net Guard will appear
to confirm that you want to connect. This feature helps you
avoid accidental connections. You can disable the Net Guard in
the future by selecting Always Auto-Connect when the Net
Guard is displayed.
To change your Net Guard settings:
1. Press to access the main menu.
2. Select Settings.
3. Select PCS Vision().
4. Select Net Guard ( ) and choose an option:
䡲
On to activate the Net Guard.
䡲
Offto deactivate the Net Guard.
Note:When enabled, the Net Guard appears only once per session. The Net
Guard does not appear if the phone is merely re-connecting due to a time-
out.
To Next Page
Loading...
