Sanyo MPR-311D(H) - Control panel

NAME AND FUNCTION OF PARTS
I Control panel
®
0'
0'
II
II
El
0 0
0
\,0 "
0
0"
DEFROST
"" ~"
"
. -
_:.All ..
._.
TeMP. CONTROL
UGHT
MPR·311(H)
®@@ @
®
0'
II
sll
AA
El
0
0
0
0 0
0" ~~
'ow
"~
,~
DEFROST w,'m.
o~.
"
.=. .~-
lEMPERATIJRE
lEMP. CONTROL
UGHT
MPR·311D(H), MPR·311DR(H)
cD Buzzer switch (BUZZER)
By sliding this switch to OFF position, the buzzer can
be
silenced when the alarm is activated.
® Defrost lamp (DEFROST)
This
lamp is lit during defrosting.
@ High temperature alarm lamp (HIGH TEMP.)
This
lamp is lit during high temperature alarm condition.
@ Door check lamp (DOOR)
This lamp is lit when the door is open. (MPR·311 D(H),
MPR·311 DR(H))
@ Digital temperature display
This indicator shows the chamber temperature or set
temperature. (MPR·311D(H), MPR·311DR(H))
7
@ Set button (PUSH SET)
The set temperature
is displayed while this button is
pressed. (MPR·311D(H), MPR·311DR(H))
r:v Temperature control knob
This knob is for setting a desired temperature.
® Fluorescent lamp switch (LIGHT)
To turn
on the light, keep on pressing this switch until
the both sides of a fluorescent lamp is lit. To turn off
the
light, press this switch again.
® Power supply lamp
This lamp is lit when the power is supplied to the unit.
(MPR·311(H)
only)