Sanyo PDG-DSU30 - Disassemble Blower Module; Disassemble LVPS Module

PDG-DSU30 Condential 2-11
2-16 Disassemble Blower
Module
1. Unscrew 3 screws (as red circle) to
disassemble the Blower Module.
2. Seprate the Blower and Blower Rubber.
2-17 Disassemble LVPS
Module
1. Unscrew 6 screws (as red circle).
2. Unplug 3 connectors (as yellow square).
3. Cut off the cable tie (as green square).
4. Disassemble the LVPS Module, AC
Inlet Bracket and LVPS to MB cable.
AC Inlet Bracket
LVPS to MB cable