Sanyo PDG-DXL100 - Controlling the Projector from Web; Configuring the Network Setting

32
English
User Controls
1. Fill in a new IP, a subnet mask, a gateway and a DNS in the
dialogue box.
2. Then choose apply and press “ENTER” button to effectuate the
conguration process.
3. Open your web browser and type in the IP address, it has entered
LOGIN mode.
4. Input the user name and password then press “LOGIN” button
on the screen, the web page will display as below:
5. Open “Control Panel” to control your projector.
Controlling the Projector From Web
Conguring the Network Setting
When you used the
projector IP address,
you will can not link to
your service server.
N
o
t
e
(1) User name:user /
Password:user
(2) User name: admin-
istrator / Password:
admin
Remark: Only admin-
istrator could enter the
Network setting and
alert setting.
N
o
t
e