Sanyo PDG-DXL100 - Alert Setting Page

English
39
English
User Controls
Alert Setting Page
Email Setting

E-mail Alert: You can set whether to be notied by email (Enable) or
not (Disable).

To/CC/From: You can enter email address of sender (From) and
recipients (To/Cc) to receive notication when an abnormality or
warning occurs.

Subject: You can enter the subject line of the email.
Click the “Email Alert Test” button to test the e-mail alert settings.
SMTP Setting
SMTP server, User name and Password should be provided by
your network administrator or MIS.
Alert Condition
You can select the abnormalities or warnings to be notied by
email. Select items by ticking on check boxes. When any of the alert
conditions occur, an email will be sent to the recipients (To/Cc).
Click the “Submit” button to apply the selection.