Sanyo PDP-42XS1 - Page 29

Setting System (continued)
26
Setting Sleep Timer
You can quickly set the sleep timer by using the SLEEP button on the remote control. Press this button
repeatedly to select a desired value.
Setting Current Time
Current Time 10:04
Timer
Turn Off Time On
01:00
Turn On Time On
08:20
Turn On Prog. 001
Then the Current Time item will be highlighted automatically.
2
3
With the unit working, press TIMER to display the timer setting menu.
1
Press MENU to return back to the upper-level menu.
Press ENTER to start setting current time.
Push ENTER(Left/Right) to toggle between hour and minute, push
ENTER(Up/Down) to adjust.
Setting Turn On Program
Push ENTER(Down) repeatedly to select Turn On Prog.
3
2
With the unit working, press TIMER to display the timer setting menu.
1
Push ENTER(Left/Right) to adjust.
In Standby mode, the TV set automatically turns on at the preset
time and broadcasts the preset program .
Turn On Prog. 001
Timer
Current Time 10:04
Turn Off Time On
01:00
Turn On Time On
08:20
Before setting the Turn Off Time or Turn On Time, you should set the item to On in advance.
If you want to cancel the Off-Timer or On-Timer function, please set the [ Turn Off Time] or [Turn On Time] to Off.
Setting On/Off Timer
Turn Off Time
01:00
Timer
Current Time 10:04
On
Turn On Time On
08:20
Turn On Prog. 001
Push ENTER(Down) repeatedly to select Turn Off Time or Turn On Time.
4
5
2
With the unit working, press TIMER to display the timer setting menu.
1
Press MENU to return back to the upper-level menu.
Press ENTER to start setting time.
Push ENTER(Left/Right) to toggle between hour and minute, push
ENTER(Up/Down) to adjust.
Note:
Push ENTER(Left/Right) to select On .
3
2
3
4
1
Repeat steps 1~3 in [Selecting Menu Language].
Push ENTER(Down) repeatedly to select WSS item.
Push ENTER(Left/Right) to select On or Off.
Note:
If the [WSS] (Wide screen signaling) function is changed from OFF
to ON, the unit can identify the WSS signal.
Press MENU repeatedly to exit.
1. Child Lock: Off
2. Change Password
3. WSS: Off
4. APS: Off
5. Program Area: Others...
6. Menu Language: English
7. Menu Background: Opaque
Option
Setting WSS
Before setting Turn Off/On Time, it is recommended that the Current Time should be set first.