Sanyo PDP-42XS1 - Adjusting Screen Aspect Ratio

Changing Screen Layout(continued)
28
You may also use the ZOOM button to select the screen aspect ratio .
Auto –– For Auto signal format. This mode displays the picture format as transmitted by the broadcaster.
16:9 –– For 16:9 signal format. This mode displays a 16:9 aspect ratio picture.
14:9— For 14:9 signal format. This mode displays a 14:9 aspect ratio picture.
4:3 –– For 4:3 signal format. This mode displays a 4:3 picture at its standard 4:3 size without any stretching.
Panorama— In this mode the picture is progressively stretched toward each side of the screen.
Zoom— For 4:3 letterbox signal format. This mode stretches the picture horizontally and crops the top and
bottom black bars of the picture.
Changing Screen Aspect Ratio
Press MENU to display the menu main page.
1
Push ENTER(Up/Down) repeatedly to display Screen menu page.
2
The Display Mode item will be highlighted automatically.
3
Push ENTER(Left/Right) to select a desired screen ratio.
4
Press MENU repeatedly to exit.
5
Press ENTER to access.
1. Display Mode: Panorama
2. PIP Mode: Off
3. MultiWin Mode: Off
4. H Size 0
5. H Position 0
6. V Position 0
7. Phase 31
8. Auto Sync
9. Default
--
+
-
+
-
+
-
+
Screen