Sanyo PLC-WXU700 - Page 58

57
Setting
On start
Whenthisfunctionissetto On,theprojectorwillbe
automaticallyturnedonjustbyconnectingtheACpower
cordtoawalloutlet.
Note:
 Besuretoturnofftheprojectorproperly(see"TurningOff
theProjector"onpage23).Iftheprojectoristurnedoff
intheincorrectsequence,theOnstartfunctiondoesnot
workproperly.
Closed caption
Closedcaptionisaprintedversionoftheprogramsoundor
otherinformationdisplayedonthescreen.Iftheinputsignal
containsclosedcaptions,youcanturnonthefeatureand
switchthechannels.PressthePoint▲▼buttonstoselect
Off,CC1,CC2,CC3orCC4.
Iftheclosedcaptionisnotclear,youcanchangethetext
fromColortoWhite.
Closed Caption
Note:
TheClosedCaptionisavailableonlyunderthesituation
below.
•WhentheinputsignalisNTSCofcompositeand
S-video,andthesystemissetaccordingtothesignal
orseton
Auto.
  •Thesystemmustbeseton
NTSCorAutoinVideo
SystemSelection.(p.42)
  •TheiconofClosedcaptionisdisplayedingraywhileit
isnotavailable.
  •TheClosedcaptionisunavailablewhenOn-Screen
menuandP-Timeraredisplayed,andPicturein
Pictureisactive.
PressthePoint▲▼buttonstoselect
Off,CC1,CC2,CC3orCC4,andthen
PresstheSELECTbutton.