Sanyo PLC-XF46N - Page 34

- 34 -
MAIN-SW Unit
A
A
A
A
D
D
SW902
LF901
SW901
AC Inlet
Noise Filter
C
C
Holder
Hook
(a)
(a)
B
B
Fig. 8-3
Fig. 8-3a
8-3
Mains switch Unit removal.
1. Remove 4 screws-A and remove the Main-SW Unit.
2. Remove 2 screws-B and remove the Lamp Cover Switch(SW902).
3. Remove 2 screws-D and remove the AC Inlet.
4. Unhook the stoppers and remove the Mains Switch(SW901).
Push part(a) and pull the Main Switch.
5. Remove 2 screws-C and remove the Noise Filter.
(See Fig.8-3, 8-3a)
Mechanical Disassemblies
To remove the Fuse.
PLC-XF46E
Turn the fuse holder cover with the slot screw driver.
Remove the fuse and the fuse holder cover upward.
PLC-XF46N
Remove the fuse and the fuse holder cover forward.
Fuse holder
cover
Fuse
Fuse
Fuse holder
Fuse holder
cover
Fuse holder
Fig. 8-3b
Fig. 8-3c