Sanyo PLC-XF46N - Page 37

- 37 -
10-1
Net Boards(PBS Fan net, Lamp Fan net) removal.
1. Remove 2 screws-A and remove the PBS Fan net Board.
2. Remove 2 screws-B and remove the Lamp Fan net Board.
(See Fig.10-1)
10
-2
Fans(FN911, FN912), EXH Fan net Board and Duct removal.
1. Remove 3 screws-A and remove the Duct.
2. Remove 2 screws-B and remove the Fan(FN911).
3. Remove 2 screws-C and remove the Fan(FN912).
4. Remove 2 screws-D and remove the EXH Fan net Board.
(See Fig.10-2)
Mechanical Disassemblies
PBS Fan net
Board
Lamp Fan net
Board
A
A
B
B
FN911
B
B
EXH Fan net
Board
Duct
A
A
A
D
D
FN912
C
C
Fig. 10-1
Fig. 10-2