12-3
Optical filters and Polarized glasses disassemblies.
1. Remove 3 screws-A and remove the stoppers.
2. Remove the plate.
3. Remove the polarized glasses and Prepolarized glasses upward.
(See Fig.12-3)
Note:
Each polarized glasses use different characteristic polarization glasses. Mark the polarizer units as they
are removed from the optical unit so that they may be reassembled in the same location from which they
were removed.
Fig.12-3
Glass should be placed as the film attached side comes to the LCD panel side.
Optical Unit Disassemblies
To Next Page
Loading...
