- 43 -
13-4
Relay lens unit removal.
1. Remove 2 screws-A and remove the Relay lens unit.
2. Remove 4 screws-B, remove the plate and remove the Relay lens.
(See Fig.13-4, 13-4a)
Side View
Spherical surface
comes this side.
Spherical surface
Relay lens
unit
A
A
Holder
B
B
B
B
Relay lens
Plate
The printed marker comes this side.
Fig.13-4
Fig.13-4a
13-3
Condenser lens unit removal.
1. Remove 2 screws-A and remove the Condenser lens unit.
2. Remove 4 screws-B, remove the plate and remove the Condenser lens.
(See Fig.13-3, 13-3a)
A
A
Condenser-lens
unit
Holder
Plate
Condenser lens
B
B
B
B
Flat surface
plane comes this side
* Lens should be placed as the flat surface side
comes to the Holder side.
Fig.13-3
Fig.13-3a
Optical Unit Disassemblies
To Next Page
Loading...
