Sanyo PLC-XF46N - Page 46

- 46 -
Optical base top
15
Optical base top removal.
1. Remove 11 screws and remove the Optical base top.
Be careful not to damage the optical parts.
(See Fig.15)
Note:
Be careful of the optical base top slowly and remove it. Otherwise optical parts follow together and become
cause to damage.
16
Cover mirror and Fans (FN917, FN918, FN919, FN920) removal.
1. Remove 4 screws-A and remove the Cover mirror.
2. Remove 8 screws-B , unhooks the plates and remove the Fans.
(See Fig.16,16a)
Note :
Mark the Fans as they are removed from the cover mirror so that they may be reassembled in the
same location from which they were removed.
A
A
A
A
Cover mirror
Fan(FN917)
Fan(FN918)
Fan(FN920)
Fan(FN919)
Plate-C
Plate-A
Plate-B
Hook
B
B
B
B
BB
B
B
Fig.15
Fig.16
Fig.16a
Optical Unit Disassemblies