Sanyo PLC-XF46N - Page 47

- 47 -
Mirror units
Mirror units
A
A
A
A
Holder
Mirror
Mirror
B
B
B
B
C
D
E
E
F
F
F
F
Stopper (C)
Stopper (C)
Stopper (E)
Stopper (B)
Stopper (A)
Stopper (A)
Stopper (B)
Stopper (D)
The printed marker comes Holder side.
17-1
Mirror units removal and disassemblies.
1. Remove 4 screws-A and remove the Mirror units.
2. Remove 4 screws-B and remove the Stoppers(C).
3. Remove screw-C and remove the Stopper(E).
4. Remove screw-D and remove the Stopper(D).
5. Remove 2 screws-E and remove the Stoppers(B).
6. Remove 4 screws-F and remove the Stoppers(A).
(See Fig.17-1, 17-2a)
Mirror units are same as.
Note : Do not touch mirrors surface directly with hand.
Fig.17-1
Fig.17-1a
Optical Unit Disassemblies