Sanyo PLC-XF46N - Page 52

- 52 -
A
B
Flat surface
B
Condenser lens(out)
Fig.33
Fig.34
Fig.35
Fig.36
Fig.37
Fig.38
Fig.39
Fig.40
Fig.41
Printed marker comes this
surface side.
Printed marker comes always to
the position of the figure.
Mirror and Optical filter
Dichroic mirror
Condenser Lens(OUT)
Condenser Lens(IN)
Plane surface comes
this side.
PBS and Integrator lens (OUT)
Integrator lens (In)
Slot part comes this top
side.
Slot part comes this
top side.
Integrator lens should be
placed as rugged surface side
comes to the Holder side.
Integrator lens should be
placed as rugged surface side
comes to the Holder side.
Printed marker comes
this position.
(The lower side of back)
Film attached side comes to
this side.
Polarized glass
LCD Panel
Film attached
side.
Polarized glasses should be placed
as the film attached side comes to
the LCD panel side.
Optical filter(HCP)
Optical filter(HCP) and Polarized glass
Prepolarized glass(IN)
Film attached side
Polarized glass(IN)
Film attached side
Marker comes
this top side.
Slit comes Polarized
glass side.
Rugged surface
side
Spherical surface side
The marker comes this sur-
face side
(Non Spherical surface side)
Relay lens(OUT)
The arrow mark points at the
LCD panel.
LCD
panel
Optical Parts Location and Direction