Sanyo PLC-XF47 - Page 24

- 24 -
A
A
B
C
B
D
D
E
E
E
E
4-6
Terminal Board 5 BNC disassemblies.
1. Remove 2 screws-A ,remove 2 screws-B, remove screw-C and remove the Terminal Board 5 BNC.
2. Remove 2 screws-D, remove the Holders and remove the Earth BRKT Slot.
3. Remove 4 screws-E and remove the Handles.
Mechanical disassemblies
4-5
Terminal Board DVI disassemblies.
1. Remove 2 screws-A, remove screw-B, remove screw-C, and remove the Terminal Board DVI.
2. Remove 2 screws-B, remove the Holders and remove the Earth BRKT Slot.
3. Remove 4 screws-C and remove the Handles.
A
A
B
B
C
C
C
C
Terminal Board DVI
Earth BRKT Slot
Holder
Handle
Panel
Terminal Board 5 BNC
Holder
Earth BRKT Slot
Panel
Handle
Handle
Handle