Sanyo PLC-XF47 - Page 27

- 27 -
B
B
A
C
D
E
Mechanical disassemblies
1. Remove screw-Ar and remove the grounding leads from the Holder.
2. Remove 2 screws-B and remove the Holder-A.
3. Remove screws-C and remove the Ballast trigger box 2.
4. Remove screws-D and remove the Holder-B. Remove screws-E and remove the Ballast trigger box 1.
5. Remove the Lamp Ballast Unit1 and Lamp Ballast Unit2.
5-4
Lamp Ballast Units 1-2 removal.
Ballast 2
Ballast 1
Ballast
trigger box 2
Ballast
trigger box 1
Holder-A
Holder-B
Grounding Lead
Grounding Lead