- 37 -
1. Remove the Retaining ring(ER-type) by leaving it against the adjustable foot with slot screwdriver.
2. Turn the adjustable feet and to take from the Cabinet bottom off. (2 places)
3. Remove 20 screws and remove the Handles.
9-2
Rear adjustable feet and Handles removal.
Mechanical disassemblies
9-3
Shield plates and Sheets removal.
1. Remove the shield plates and sheets from the cabinet bottom.
(Shield plates are bent and attached in the cabinet bottom.)
(See Fig.9-3)
Shield plates and Sheets
Slot screwdriver
Adjustable foot
(Rear)
Retaling
Ring
Adjustable feet
(2 Places)
Adjustable foot
(Rear)
Adjustable foot
(Rear)
Handle
Handle
Sheet-B
Sheet-C
Sheet-A
Shield Plate-B
Shield Plate-C
Shield Plate-A
To Next Page
Loading...
