Sanyo PLC-XF47 - Video Input Settings; Video System and Input Source Selection

- 40 -
C
C
B
B
B
B
A
A
A
A
Optical unit disassemblies
11
Projection lens and Lens shift unit removal.
1. Loosen the screw-D and remove the Safety Clamp.
2. Slide the lens lock lever on the projector to "UNLOCK" (UPPER) position and detach the
Projection lens with Mount Parts to the Lens shift unit.
(Refer to Lens replacement and Installation procedures manual)
3. Loosen 4 screws-A and remove the Projection lens.
4. Remove 4 screws-B and remove the Lens shift unit.
5. Remove 2 screws-C and remove the plate.
B
B
B
B
Lens lock lever
Unlock (upper) position
Safety Clamp
Plate
Lens Shift unit
Projection lens and Attachment parts
Attachment parts
Projection lens
D