- 46 -
A
A
A
A
A
A
A
A
Lamp-2
Lamp-1
Lamp-3
Lamp-4
13-6
Mirrors removal.
14
Assembly Lamps removal.
Loosen 8 screws-A and remove the 4 Lamp assemblies upward.
Note :The characteristics and ages of lamps are managed by CPU.
Mark the lamp assemblies as they are removed from the
optical unit so that they may be reassembled in the same
location from which they were removed.
Remove 5 stoppers and pull the 5 mirrors upward.
Note : Do not touch the mirrors surface directly with hand.
Each mirror uses different characteristic optical filter glasses. Mark the mirrors as they are removed
from the optical unit so that they may be reassembled in the location and direction from which
they were removed.
Stopper-A
Optical Unit disassemblies
CAUTION :
Do not operate a Projector while any of lamps removed. It may
result in malfunctions, fire hazard, or other accidents.
Do not drop a lamp assembly or touch a glass bulb! Glass can
shatter and may cause injury.
Stopper-B
Stopper-B
Stopper-B
Stopper-B
Mirror (R)
Mirror (B-cold)
Dichroic Mirror (Y)
Dichroic Mirror (C)
Mirror (B-cold)
To Next Page
Loading...
