-22-
■ Adjustment
Not designated PC AV Component
42 1. PSIG adjustment ●
43 1. PSIG adjustment ●
1 2. Signal center DC adjustment-Red ●
2 2. Signal center DC adjustment-Green ●
3 2. Signal center DC adjustment-Blue ●
7 3. Red contrast adjustment ●● ●
8 3. Green contrast adjustment ●● ●
9 3. Blue contrast adjustment ●● ●
10 4. Red signal amplitude adjustment ●
11 4. Green signal amplitude adjustment ●
12 4. Blue signal amplitude adjustment ●
13 5. Flicker reduction -Red ●
14 5. Flicker reduction -Green ●
15 5. Flicker reduction -Blue ●
16 6. Contrast linearity adjustment ●● ●
17 7. White balance adjustment-Red ●● ●
18 7. White balance adjustment-Blue ●● ●
Caution :
Other adjustment items are not related to service and a maintenance. Don't press the VOLUME (+) and (-) button
at the time of those adjustment items. Otherwise it may cause loss of product safety.
Item-no. Adjustment Item
Adjustment Mode
■ SERVICE MODE ADJUSTMENT MENU
Note :
In case of adjusting without the cabinet top, the setting for Fan Control is needed specially as shown below.
(Refer to “Electrical Adjustment” to enter the service mode and adjust.) After servicing, set to previous data.
Adjustment Item: No. 51
Adjustment Data: “0” (With Cabinet Top) ➞ “1” (Without Cabinet Top)
To Next Page
Loading...
