Sanyo PLV-Z4000 - Page 26

- 26 -
10-3
Eco Power Board and Fan(FN902) removal.
1. Remove 1 screwsA (T3x8) and remove the Eco Power Board ass'y.
2. Remove 1 sccrew-B (T3x8) and remove fan unit from the holder.
3. Remove the 2screws-C (M3x8) and remove the Fan(FN902).
Fan unit
A
A
C
C
Fan(FN902)
Mechanical disassemblies
Eco Power Board ass'y
Eco Power Board
B
Isolation sheet