Sanyo RP 8260UM - Cabinet and Chassis Disassembly; Removing External Components; Separating Chassis and Internal Parts; Printed Circuit Board Disassembly

CABINET & CHASSIS DISSASSEMBLY
1. Remove the four screws Y1 (tapping screw pan head 4. Remove the two screws Y2 (tapping screw pan head
3 x 20 mm) attaching the BACK LID (2) to the 16 mm) attaching the CHASSIS (3) to the CABINET
CABINET (1). (1).
2. Unplug the antenna cord from the antenna socket (9) on The CHASSIS with P.C.Board can be separated.
the Printed Circuit Board to separate the BACK LID (2). 5. Detach the POINTER (7) and DIAL SCALE (8).
3. Detach the VOLUME KNOB (5) and the TONE KNOB 6. Remove the one screw Y3 (tapping screw pan head 3 x
(6). 10mm) for disassembling the TUNIG SHAFT AS-
SEMBLY (4) from the CHASSIS (3).
P.C.B. DISASSEMBLY
Before removing the screws from the dial drum, secure
it with string so that the dial rope will not come off
adversely.
S>
SG
4
SA ese
SS
rt