Assigning an Image to a Contacts Entry
You can assign an image to a Contacts entry. The image is displayed
when the entry calls you.
To assign an image for an entry:
1. Press the navigation key right.
2. Select the entry for which you want to assign the image and
press .
3. Press Options (right softkey), highlight Edit, and press or if
you are selecting email/web address, press Edit (right softkey).
4. Scroll down to Picture ID and press .
5. Select your desired image by using the navigation key and
press , then press OK (left softkey) to assign.
6. Press Save (left softkey) to save the image type.
Selecting a Ringer for an Entry
You can assign a ringer type to a Contacts entry so you can identify
the caller by the ringer type. (See “Ringer Types” on page 39.)
To select a ringer type for an entry:
1. Press the navigation key right.
2. Select the entry for which you want to set the incoming ringer
and press .
3. Press Options (right softkey), highlight Edit, and press or if
you are selecting email/web address, press Edit (right softkey).
4. Scroll down to Ringer and press .
5. Scroll to your desired ringer and press . (When you highlight
a ringer type, a sample ringer will sound.)
6. Press Save (left softkey) to save the ringer type.
Note:If you set an animation ringer (indicated with the icon) and an image,
your phone plays the ringer (audio) of the animation ringer and displays the
image you selected.
Section 2G: Using the Contacts Directory 92
To Next Page
Loading...
